6″/7″ Foam Pads for Metal and Paint Polishing

These Foam Pads for Metal and Paint Polishing are designed for high performance and durability during metal and paint restoration. Ranging from soft to coarse, these pads are appropriate for use on a whole spectrum of restoration projects. They have a 6″ hook and loop base and a 7″ face/polishing surface.

Which pad should I use?

The condition of your project surface will dictate which pad is necessary. See below for a brief description of each pad:

GreenExtra-CoarseCutting Foam Pad (Optional):

Step 1:Mostaggressive, used to correct more severe imperfections on metal and paint.

BlueCutting Foam Pad:

Step 1:Second-Mostaggressive, used to correct moderate imperfections on metal and paint.

YellowPolishing Foam Pad:

Step 2:Lessaggressive, used to correct less-severe imperfections on metal and paint.

WhiteFinishing Foam Pad:

Step 3:Second-Leastaggressive, employs a soft and fine pore structure to add a high shine to metal and painted surfaces.

RedExtra-Fine Foam Pad (Optional):

Step 1:Leastaggressive, used to add an final, high-luster shine to your polished metals and paint.

How do I attach the pad to the machine?

The pad should be attached to a dual-action (DA) polishing machine via a backing pad (as shown below):